- Simple push-button Operation Control.
- Indicator LEDs signal every mode of operation at a glance.
- Pre-set (also adjustable by user): INLET, COOL, PURGE, VENT, and BLEED micro metering valves.
- Vernier handles on all metering valves allow for reproducible settings.
- Excellent choice for multi-user sites.
- Indicator LEDs signal every mode of operation at a glance.
- Internal filtration* protect samples and valves down to 0.5µm.
- EZ top loading process chamber.
- Under-lit chamber with viewing port aids visualization of chamber status.
- Internal surfaces inert to LCO2 and ultra-pure alcohols.
- Advanced solid state reliable electronics.
- Integrated temperature control.
- Fast adiabatic chamber cooling* with CO2.
- Static pressure control module for automatic pressure stability.
- Tough, solvent resistant cabinet.
- All electronic and other components meet UL, CE and/or U.S. Military Specifications.
- Optional SOTER™ Condenser* can be attached to capture waste alcohol and deaden PURGE exhaust noise.
Samdri®-795
- The Semi Automatic Critical Point Dryer
- 1.25" ID chamber and 1.25" height
The SAMDRI®-795 provides the operator with solid-state circuitry and simple push button operation. By utilizing the many presets and internal controls, precise and reproducible results are allowed.
Features
Specifications
Standard Accessories
Optional Accessories
CPD MULTI-APPLICATIONS
- Cabinet: 14.0"(W)x 10.25"(H) x 21.5"(L) [35.6cm(W) x 26.0cm(H) x 54.6cm (L)]
- System Set-Up Area Required: 20"(W) x 30"(D) [51cm(W) x 76cm(D)]
- Chamber size: 1.25" I.D. x 1.25" Depth
- Temperature gauge range: -30°C to 60°C, Pressure gauge range: 0 to 2,000 psi.
- 120V / 50-60Hz (Other voltage units also available: Please inquire)
- Flexible High-Pressure braided stainless steel inert Teflon® lined LCO2 Supply Hose, 5ft (approximate 1.5m) long.
- LCO2 Filter Assembly (#8784) removes water/oil and particulates down to 0.5µm. Filter is conveniently pre-installed onto the LCO2 High Pressure Hose.
- Static free exhaust tubing for the PURGE/VENT/BLEED and COOL exhaust outlets.
- Flow Meter supplied allows precise periodic BLEED exhaust rate flow control.
- Spare chamber O-ring (2), chamber lamp (1), and 5A slo-blow fuses (2).
- User Manual and Check-Out data sheet.
- Free lifetime technical support.
- 2 year warranty on all parts and labor.
- 8777: :SOTER™ CONDENSER
- 8760-01: :KNURL NUT for 1.25" Process Chamber
- 8760-40: :5 AMP FUSE for SAMDRI® Models: PVT-3D, 795, 815, 815B, 915B (Series A & Series B Only)
- 8770-10: :CHAMBER LAMP, 120Volt/60Hz
- 8770-32: :HIGH-PRESSURE HOSE, 5ft
- 8770-33: :HIGH-PRESSURE HOSE, 10ft
- 8770-50: :CHAMBER LID, for any tousimis SAMDRI® with a 1.25" diameter chambers
- 8784: :LCO2 Filter Assembly
- 8784A: :LCO2 FILTER ELEMENT for #8784
- 8770-83B: :0.5µm Stainless Steel Particulate Filter Element for LCO2 T-Filter or External Purge Line Filter.
- 8784B: :O-Ring for # 8784 LCO2 Filter Assembly Seal
- 8784-05: :Gasket for LCO2 Tank Connect
- 8770-51: :O-Ring for 1.25" Chamber I.D.
- 8770-45: :Flow Meter - Use with any 1.25" dia. Samdri® Chamber (20 SCFH)
- 8770-53: :POWER CABLE
- 8770-54: :LCO2 TANK SCALE W/ REMOTE DISPLAY
- 8770-56: :Step-Down Transformer, 200-240V → 110-120V, 1000W
- 8770-83: :Internal 0.5 µm Brass Particulate Line Filter
- 8761: :GRID HOLDER, Holds 12 grids
- 8762: :SAMPLE HOLDER, FOR 12 SAMPLES
- 8763: :SAMPLE HOLDER, FOR 24 SAMPLES
- 8764: :SAMPLE HOLDER, FOR 4 SAMPLES
- 8766: :COVER SLIP HOLDER, for 9mm to 13mm Diameter Glass Cover Slips
- 8766-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8766
- 8766-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8766
- 8767: :COVER SLIP HOLDER, for 16mm to 22mm Diameter Glass Cover Slips
- 8767-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8767
- 8767-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8767
Application Images
Enterobacteria Clorox
Fungus Gnats California Department of Food and Agriculture, Plant Pest Diagnostics Center
Drosophila Melanogaster University of Connecticut
Booth # 32
Date: December 18, 2024
Location: Banquet Hall on the Second Floor of Zhongfu Building ,No. 18 Gongti East Road,Chaoyang District, Beijing
Booth # 10
Date: January 20-23, 2025
Location: Kaohsiung Exhibition Center, Kaohsiung, Taiwan