- Compact, lightweight tabletop size with small footprint.
- Precise flow control for INLET, COOL, PURGE, VENT, and BLEED micro metering valves.
- Vernier handles on all metering valves allow for reproducible settings.
- Internal surfaces inert to LCO2 and ultra-pure alcohols.
- Integrated automatic temperature control.
- Static pressure control module for automatic pressure stability.
- EZ top loading process chamber.
- Internal filtration* protect samples and valves down to 0.5µm.
- Tough, solvent resistant cabinet.
- Under-lit chamber with viewing port aids visualization of chamber status.
- Fast adiabatic chamber cooling* with CO2.
- Advanced solid state reliable electronics.
- All electronic and other components meet UL, CE and/or U.S. Military Specifications.
- Optional SOTER™ Condenser* may be attached to capture waste alcohol and deaden PURGE exhaust noise.
Samdri®-PVT-3D
- The Manual Critical Point Dryer with advanced auto-pressure and temperature control
- 1.25" ID chamber and 1.25" height
The SAMDRI®-PVT-3D provides high precision results using manual controls. The four Micro-Metering Valves are conveniently located on top of this critical point dryer for ease of operator control. Automatic safety controls are standard features incorporated within the SAMDRI®-PVT-3D.
Features
Specifications
Standard Accessories
Optional Accessories
CPD MULTI-APPLICATIONS
- Cabinet: 12.75"(W)x 9.75"(H) x 18.50"(L) [32.4cm(W) x 24.8cm(H) x 47.0cm(L)]
- System Set-Up Area Required: 20"(W) x 30"(D) [51cm(W) x 76cm(D)]
- Chamber size: 1.25" I.D. x 1.25" Depth
- Temperature gauge range: -30°C to 60°C, Pressure gauge range: 0 to 2,000 psi.
- 120V / 50-60Hz (Other voltage units also available: Please inquire)
- Flexible High-Pressure braided stainless steel inert Teflon® lined LCO2 Supply Hose, 5ft (approximate 1.5m) long.
- LCO2 Filter Assembly (#8784) removes water/oil and particulates down to 0.5µm. Filter is conveniently pre-installed onto the LCO2 High Pressure Hose.
- Static free exhaust tubing for the PURGE/VENT/BLEED and COOL exhaust outlets.
- Flow Meter supplied allows precise periodic BLEED exhaust rate flow control.
- Spare chamber O-ring (2), chamber lamp (1), and 5A slo-blow fuses (2).
- User Manual and Check-Out data sheet.
- Free lifetime technical support.
- 2 year warranty on all parts and labor.
- 8777: :SOTER™ CONDENSER
- 8760-01: :KNURL NUT for 1.25" Process Chamber
- 8760-40: :5 AMP FUSE for SAMDRI® Models: PVT-3D, 795, 815, 815B, 915B (Series A & Series B Only)
- 8770-10: :CHAMBER LAMP, 120Volt/60Hz
- 8770-32: :HIGH-PRESSURE HOSE, 5ft
- 8770-33: :HIGH-PRESSURE HOSE, 10ft
- 8770-50: :CHAMBER LID, for any tousimis SAMDRI® with a 1.25" diameter chambers
- 8784: :LCO2 Filter Assembly
- 8784A: :LCO2 FILTER ELEMENT for #8784
- 8770-83B: :0.5µm Stainless Steel Particulate Filter Element for LCO2 T-Filter or External Purge Line Filter.
- 8784B: :O-Ring for # 8784 LCO2 Filter Assembly Seal
- 8784-05: :Gasket for LCO2 Tank Connect
- 8770-51: :O-Ring for 1.25" Chamber I.D.
- 8770-45: :Flow Meter - Use with any 1.25" dia. Samdri® Chamber (20 SCFH)
- 8770-53: :POWER CABLE
- 8770-54: :LCO2 TANK SCALE W/ REMOTE DISPLAY
- 8770-56: :Step-Down Transformer, 200-240V → 110-120V, 1000W
- 8770-83: :Internal 0.5 µm Brass Particulate Line Filter
- 8761: :GRID HOLDER, Holds 12 grids
- 8762: :SAMPLE HOLDER, FOR 12 SAMPLES
- 8763: :SAMPLE HOLDER, FOR 24 SAMPLES
- 8764: :SAMPLE HOLDER, FOR 4 SAMPLES
- 8766: :COVER SLIP HOLDER, for 9mm to 13mm Diameter Glass Cover Slips
- 8766-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8766
- 8766-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8766
- 8767: :COVER SLIP HOLDER, for 16mm to 22mm Diameter Glass Cover Slips
- 8767-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8767
- 8767-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8767
Application Images
An infected adenoid covered with biofilm (asterisk). Red blood cells are few (arrow) King Abdul Aziz University Hospital, Saudi Arabia
Globba Cernua Antherwings Royal Botanic Gardens Kew. UK
Drosophila Melanogaster University of Connecticut
Booth # 32
Date: December 18, 2024
Location: Banquet Hall on the Second Floor of Zhongfu Building ,No. 18 Gongti East Road,Chaoyang District, Beijing
Booth # 10
Date: January 20-23, 2025
Location: Kaohsiung Exhibition Center, Kaohsiung, Taiwan